Procession vortex intelligent flowmeter

1.Summary:

Liquid  flows through the turbine housing causing an internal rotor to spin. As the  rotor spins, an electrical signal is generated in the pickup coil. This signal  is converted into engineering units (liters, cubic meters, gallons etc.) on the  local display where is applicable. Optional accessory modules can be used to  export the signal to other equipment.

Upon  receipt, examine your meter for visible damage. The turbine is a precision  measuring instrument and should be handled carefully. Remove the protective  plugs and caps for a thorough inspection. If any items are damaged or missing, contact  VOHA INSTRUMENT………………………

Make sure the turbine flow model meets your  specific needs. For your future reference, it might be useful to record this  information on nameplate in the manual in case it becomes unreadable on the  turbine. Refer to the nameplate for your customized product’s specification.
 2. SPECIFICATION
 Performance
 Repeatability: ±0.2%
 Accuracy: Standard:±1% of reading;
 Optional:±0.5% of reading
 Wetted  Components
 Housing: Standard:304SS;
 Optional:316SS
 Bearings and Shaft: Tungsten Carbide
 Rotor: Standard-2Cr13 Stainless Steel
 (Optional Alloy CD4Mcu)
 Retaining Rings: 316 Stainless Steel
 Output  Signal:(Where applicable)
 Sensor: Pulse signal(Low level:≤0.8V,High level≥8V)
 Transmitter: 4 to 20 mA DC current signal
Signal  Transmission Distance:≤1000m
 Electric  Connections:
 Basic Type: Hausman connector or Three core  cable
 Explosion Proof Type: ISO M20×1.5 Female
Explosion  Proof Level:
 Standard: None ;  
 Optional: ExdIIBT6
Protection  Level: IP65
 3. OPERATION CONDITIONS
 Ambient:
 Temperature: -10℃ to +55℃
 Pressure: 86 to 106KPa
 Relative Humidity: 5% to 90%
 Power  Supply:
 Sensor: +12V DC(Optional:+24V DC)
 Transmitter: +24V DC
 Field Display Type B: Integral 3.2V Lithium Battery(Others  available on request)
 Field Display Type C: +24V DC
 Fluid  Temperature and Pressure:
 Temperature: -20℃ to +110℃
 Pressure: Fluid pressure should be limited  according to rating.
Measurable  Flow Rate Range and Pressure Level:(See table 1)
 Table 1.Measurable Flow Range and Pressure Rating

Model  Selection(See Table 2)
 Table 2.Model  Selection Guidance